[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: TV distribution amplifier recommendations
> If however, there are Bandpass filters on the inputs then the out of
band
> signal would not get through in which case split them first and feed
them
> into the repescive inputs.
There has to be, I tried mixing my FM and TV passivly and the result was
crap FM
reception and really bad ghosting.
In the end I had to get a diplexer with 40dB attenuation of the unwanted to
get
rid of the ghosting. Still not perfect since the VHF low band goes up to
the
bottom of the FM band almost, and the station I care about is a 500mw one
on
88.3 about 9km's away so its getting attenuated a bit, unlike the high
power
ones in the middle of the FM band (which overload every amp I have tried)
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|