[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: DIY Cable shielding
I wouldn't bother. I have speaker cable run (a bit) like this and have
no problems.
When you say "same duct" presumably you have either a 50mm air
separation gap, or have separate chanbers in the trunking / ducting as
per the regs?
Cheers,
Tim.
On 11/25/06, Clive Dilley <clive.dilley@xxxxxxx> wrote:
> I need to run a speaker cable in the same duct as a ring-main power
cable
> for about 1.5m - not very long I know, but I before I do it, I have
the
> opportunity to try to add some extra shielding to the speaker cable.
>
> I thought about wrapping this section in ordinary kitchen tin foil.
>
> Is this a stupid idea?
> Should I choose a different material for the shielding?
> If so .... what?
>
> Thanks
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|