[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: xantech Receivers
- To: ukha_d@xxxxxxx
- Subject: Re: Re: xantech Receivers
- From: Frank Mc Alinden <fmcalind@xxxxxxx>
- Date: Mon, 29 Sep 2003 18:59:29 +1000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <bl7gum+6nuo@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
Hi David
I made a C_Bus ir interface for Robs Easy6 preamp and it connects to an
rj45 on the easy6...We hit a snag because the ir is passed straight
through to the emitters therefore no control over the Easy6 ...Rob uses
xantech receivers connected to each ir zone input on the Easy 6 so we were
hoping to connect the interface to this.....Is the receiver signal Idle
High or Low ??
Thanks
Frank
PS .......Any Updates on HomeBrain???
----- Original Message -----
From: David Buckley
To: ukha_d@xxxxxxx
Sent: Monday, September 29, 2003 6:39 AM
Subject: [ukha_d] Re: xantech Receivers
--- In ukha_d@xxxxxxx, "Rob Mouser" <rmouser@t...> wrote:
> You just made my (And Franks!) day!
because...?
Home |
Main Index |
Thread Index
|