[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: X10 Din rail wiring questions
- To: ukha_d@xxxxxxx
- Subject: Re: X10 Din rail wiring questions
- From: "Steve Cooper" <steve.cooper@xxxxxxx>
- Date: Mon, 4 Feb 2002 11:59:17 +0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Graham
I haven't got any experience of running CAT5e and T&E in the same
conduit
others may be able to help there.
But on the big question.
I have set up the consumer units holding the DIN rails modules on the feed
>from
That way all the modules are protected behide a 6A lighting breaker (one
for downstairs and one for upstairs).
i.e. Power in to house -> main cu -> through 6A breaker -> to
x10 module
consumer units switch -> X10 module
That way I can switch off all lights from the main unit or can work on an
individual X10 consumer unit by switching it off at that particular unit.
S
___________________________________________________________________________
The information contained in this message is confidential and may be
legally privileged. If you are not the intended recipient, please do not
read, copy or otherwise use it and do not disclose it to anyone else.
Please notify the sender of the delivery error and then delete the
message from your system.
Any views or opinions expressed in this email are those of the author only.
Thank you for your assistance.
___________________________________________________________________________
Home |
Main Index |
Thread Index
|