The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: Life After ADSL!!!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: X10 addressing



>> Thanks Mark & Keith for the suggestions,  they sound like
sensible
options.
>> I wasn't sure if I should split lights & applicance onto
separate address
lines....
>
>I use a house code per room but if I did it again would probably try to
add
using a single
>housecode for all ceiling lights.

How would that be an advantage?
Can't u just run around & change all the codes as Ian Lowe suggested?

>> Do you just mean you don't like the noice, or do you mean that it
screws
things up a bit?
>
>The relay in a TM12 clunks and at night it's bloody loud!

Ah yes, I can see it might be a problem.  Don't the appliance modules use
the same relays then?

>> While we're onthe subject - is the CM11 also an applicance module?
 I
can't see anything to
>>suggest it >is/tell
>> me how to change the address, but it seems a bit silly if it
isn't!
>
>No ... it's just a pass through power socket.

What a waste :(
Mine gets quite warm - is this normal?

Tony


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.