The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: X10 addressing


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: X10 addressing
  • From: "Mark Harrison" <Mark.Harrison@xxxxxxx>
  • Date: Mon, 4 Feb 2002 10:00:32 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

> The relay in a TM12 clunks and at night it's bloody loud!

Oh yes!

Mark Harrison
Head of Systems, eKingfisher

-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 4 February 2002 09:55
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Re: X10 addressing


> Thanks Mark & Keith for the suggestions,  they sound like sensible
options.
> I wasn't sure if I should split lights & applicance onto separate
address lines....

I use a house code per room but if I did it again would probably try to
add using a single housecode for all ceiling lights.

> Do you just mean you don't like the noice, or do you mean that it
screws things up a bit?


The relay in a TM12 clunks and at night it's bloody loud!




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.