[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Control panel recommedation for muti-tenant warehouse/office bldg?
On 6/13/2014 10:37 AM, G. Morgan wrote:
> Can anyone recommend a control to use for a 24 unit office/warehouse
> units?
>
> They have to be able to be armed/disarmed independently of each other. In
> each unit there is one man door and one overhead, plus the office will
> have 4 points/zones. I'm looking at 52 points max, or 28 if I put the
> overheads/man doors on single zones. Preferably something addressable
> (and available via regular distribution channels). Hopefully I can just
> run a data cable through the building instead of many cables and zone
> expanders.
>
> I thought about using a Vista 128 with V-Plex, but that does not solve
> the independent arm/disarm problem. I could always manually shunt the
> sensors with mechanical keypads at each unit, but that may be problematic
> too for several reasons.
>
> I know they make something specifically for this scenario, I just have
> never had to do one. Thanks.
>
3 Honeywell 128BPT panels will give you 24 partitions. Stay away from
the Vplex stuff. You should be able to do it all wireless with a few
well placed repeaters. Ademco also makes fully wireless keypads that can
also be powered by a small transformer.
--
Jim Rojas
Technical Manuals Online!
http://www.tech-man.com
8002 Cornwall Lane
Tampa, FL 33615-4604
813-884-6335
813-440-6653 Fax
Email: jrojas@xxxxxxxxxxxx
AOL: rojas813
MSN: jimrojas@xxxxxxxxxxx
Yahoo: jimrojas
ICQ: 20116219
GoogleTalk: Rojas813@xxxxxxxxx
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home