Re: Power832 "Stay" wont work

["A.J." <a_j@xxxxxxxx>]

Not suppose to go off yet ...... STAY or not, the exit delay is still there.


"Guy" <someone@xxxxxxxxxxxxxxx> wrote in message
news:4966335e$0$5490$9a566e8b@xxxxxxxxxxxxxxxxxx
> Here are some of the changes I made:
> 1. In [016], I turned option 7 off so that the system doesn't check for
> telephone line.
> 2. In [301] [302] [303], I removed the telephone numbers for the
> monitoring company.  I'm thinking of programming my cell phone.  Not sure
> if that will work.
> 3. In [371], I set to 9999 so that the alarm doesn't do a test.
> 4. In [401], I turned off option 1 so that if someone calls twice the
> system won't answer the phone.
>
>
> I forgot to mention that I added a smoke detector last year. Here is the
> Zone programming:
>    1 = 05: Interior, Stay/Away (Motion)
>    2 = 05: Interior, Stay/Away (Motion)
>    3 = 05: Interior, Stay/Away (Motion)
>    4 = 01: Delay 1 (Main door)
>    5 = 03: Instant (Other door)
>    6 = 03: Instant (Patio door)
>    7 = 03: Instant (Garage door)
>    8 = 03: Instant (Other garage door)
>    9 = 07: Delayed 24 Hour Fire (Hardwired)
>
> Here's what happening: The Clock is displayed on the LCD and the Ready
> Light is on.  I hold the "STAY" button for 3 seconds.  Then the LCD says
> Bypass, and the Ready and Alarm lights are on.  The alarm doesn't sound
> when I open a door.
>
> Thanks again,
> Guy
>
>> Guy wrote:
>>> I played with it a little and now when I press STAY, it says BYPASS
>>> and none of the sensors cause an alarm.
>>
>> 1.Explain what you did and what values are now assigned to zones 1-8.
>> 2. Look at the installation manual to see what the values mean.
>>
>>
>> --
>> js
>>
>> It's what you learn after you know it all that counts.
>> John Wooden
>>
>
>