Re: Paradox SPC 1738 EX

["R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx>]

Yes, unlike older Paradox lines, with the Spectra and Digiplex panels, you
can access the master code via the installer code. Provided you know the
installer code, press "enter" plus the installer code, then go into section
301, and type in your new master code, which will overwrite the old one.

To default, provided the board is not locked, power down, put on reset
jumper, power up with AC, wait a good 20 or 30 seconds, remove the jumper
and you are back to factory....000000 is the default installer code. If
locked, nothing happens at all (note you do NOT lose all settings except the
installer code like the DSC panels, so there is no danger in trying to
default)

You will find it's much easier to do everything with these lines of panels
if you hook up and use the full LCD keypad

Hope that helps

RHC


"No Name" <shall.remain@xxxxxxxxx> wrote in message
news:38but258bs4w$.11y5a4nsfw6qa.dlg@xxxxxxxxxxxxx
>
> Does anyone have the installer manual for this?  I checked tech-man.com
> and
> he doesn't have it.  I remember another site that might have it, but for
> the life of me, I can't remember the site.  It was something like
> alarmmanuals.com but google turned up empty.
>
> A customer supposedly deleted the master code.  Can the code be defaulted
> thru installer programming?  Any help would be appreciated.
>
> TIA