|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: RF Modulators
- To: ukha_d@xxxxxxx
- Subject: Re: RF Modulators
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Fri, 06 Feb 2004 13:20:30 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>
> This old chestunt keeps popping up..... to modulate video and
stereo
> audio over coax requires a nicam enocder. Nicam encoder=very
> expensive.... probably cheaper to run cat 5 and use www.kat5.tv
> including costs of replastering etc.
>
Correct. All domestic AV equipment ONLY outputs Composite and MONO on
its RF output. A Nicam encoder is required to get a properly encoded
NICAM signal for the TV to decode.
Just one point....
I can do KAT5 including the cost of Power Supplies & P&P but I dont
do KAT5 including replastering :-)
Its voodoo magic to make pink sloppy stuff defy gravity long enough
to set although I believe their are some people on this list who have
dabbled in and mastered this mystic art :-)
Keith
www.diyha.co.uk
www.kat5.tv
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|
|