The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OTish - Long VGA runs


  • To: ukha_d@xxxxxxx
  • Subject: Re: OTish - Long VGA runs
  • From: "Andy Laurence" <andy@xxxxxxx>
  • Date: Tue, 28 Oct 2003 16:01:24 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@xxxxxxx, Tony Butler <lists@a...> wrote:
> Hi guys,
>
> I have a requirement to run about 3-4 TFT's showing the same output
>from
> The problem is, they will be up to 20m from said PC :(
> I'd be looking at running at 1024x768 as a minimum, possible
1280x1024.

A few years ago, I ran a couple of 42" plasma screens from a single
PC.  The run to each plasma was around 10 metres, and the splitter
was a soldering iron, and Maplin connectors job.  They ran videos at
a decent enough quality for a media company to be happy.  I forget
what resolution they were running, but it was 800x600 or 1024x768.
The cable was just decent quality AV cable.  As always, YMMV
(especially at higher resolutions).

Cheers,
Andy
--
http://ha.andylaurence.co.uk
http://projects.andylaurence.co.uk



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.