The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IR & the Silent Gliss 5100


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: IR & the Silent Gliss 5100
  • From: "Paul S. Gale" <groups@xxxxxxx>
  • Date: Wed, 5 Feb 2003 17:23:04 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Claude,



Volt free contacts = simple switch



I recently bought one of the 'dawn to dusk' tracks. This is the basic
version but AFAIK it is the only one to support discreet open and close
contacts (via a not-well-documented feature of one of the RJ11
connectors). This means that you can attach two switches - one to open
and one to close (they DON'T toggle), in addition to the toggle switch
(press once - opens, press again - closes).



Now so far, this doesn't help you much but if you use a HA controller
such as HomeVision, Ocelot or one of the other many controllers, you can
use one or two of the outputs to replace the switches I mentioned. This
gives you IR control (via a simple bit of programming of the controller)
and other control of the curtains i.e. based on sunrise/sunset or time
program etc.



Hope this makes sense? It's been a long day!





Paul.



-----Original Message-----
From: Claudio Mio [mailto:claudio.mio@xxxxxxx]
Sent: 05 February 2003 16:08
To: ukha_d@xxxxxxx Subject: [ukha_d] IR & the Silent Gliss 5100



Hi,

Im looking at getting some electric curtains (the Silent Gliss 5100) and
spoke to a guy from tlc-direct about whether they could be directly
wired in to an IR network as opposed to using an IR emitter.

What he said is that it is possible though the IR receiver needs to
support a volt free contact. Anyone know exactly what this means? Will
this be compatible with the Xantech stuff?

Any help would be much appreciated....

Thanks
Claude


[Non-text portions of this message have been removed]



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service.



[Non-text portions of this message have been removed]


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.