The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Radiator efficiency...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Radiator efficiency...
  • From: "Mark Harrison" <Mark.Harrison@xxxxxxx>
  • Date: Thu, 14 Mar 2002 14:20:31 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

The biggest factor in her assesment (apart from the actual temperature
in the room) is probably the thermal conductivity of the surfaces she's
in contact with. Apart from when she's actually in the bath, this means
the floor and the loo seat.

Suggest you chuck a bathroom mat in their, get her to stand on that, and
then tell you whether the room's cold!

The other thing is - get a thermometer and read the ambient
temperatures, eh?

(I assume you've checked the valves, and both rooms are fully on.)

Mark Harrison
Head of Systems, eKingfisher

************************************************************************
****
Kingfisher plc
Registered Office: North West House, 119 Marylebone Road, London NW1 5PX
Registered in England, Number 1664812

This e-mail is only intended for the person(s) to whom it is addressed
and
may contain confidential information.  Unless stated to the contrary,
any
opinions or comments are personal to the writer and do not represent the
official view of the company.  If you have received this e-mail in
error,
please notify us immediately by reply e-mail and then delete this
message
>from
disclose its contents to any other person.  Thank you for your
co-operation.
************************************************************************
****



-----Original Message-----
From: Paul Gordon [mailto:paul_gordon@xxxxxxx]
Sent: 14 March 2002 13:08
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Radiator efficiency...



>
>This may sound daft, but as you say they are both getting to hot to
touch,
>what types of flooring do you have in each room? e.g. Tiles in the
bathroom
>and Carpet in the bedroom?
>

Indeed, the surface temperature of both rads is the same (bloody hot!),
but
the bathroom does have a lot more "cold" surface materials than
the
bedroom.
- Laminate wood floor, 50% tiled walls, the other 50% is just painted
plaster etc...


>Other factors could be effecting the rad, not just its output.
>

Seems likely....

Paul G.


_________________________________________________________________
Join the world's largest e-mail service with MSN Hotmail.
http://www.hotmail.com



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.