The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: AM12U Appliance Module


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: AM12U Appliance Module
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Sat, 6 Oct 2001 15:42:22 +0100
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yes that makes sense Phil but this is not the case, the LED dims slightly
but is still on with the AM off.

B.

> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 06 October 2001 15:06
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] AM12U Appliance Module
>
>
> If the transformer turns off and stays off with the LED on the
switcher
> fading only very slowly then its simply a case of the output
> smoothing caps
> on the PSU (or input caps on the switcher PCB) storing enough power to
> continue powering the switcher for as long as it takes the LED to
start to
> fade ... in that case there's nothing that needs doing to the
appliance
> module.
>
> Phil
>
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 06 October 2001 14:24
> > To: UKHA Group
> > Subject: [ukha_d] AM12U Appliance Module
> >
> >
> > Guys I am sure this has been mentioned before so sorry if it has
> > but I have
> > at last finished my rack-mounted CCTV switcher but I have a
> > slight problem.
> >
> > I have plugged the switcher transformer which supplies the power
to the
> > switcher and the CCTV cameras into an Appliance Module AM12U but
when I
> > switch the AM12U off the "on" LED on my switcher stays
on, I
> have heard of
> > this before as their is a current draw(?) I think I have to cut
> something?
> >
> > Can someone please advise me as to what to do please.
> >
> > Also thanks Keith for the wiring advise re LED's, fuses and
> resistors lots
> > back.
> >
> > TIA.
> >
> > B.
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.