The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: Home Automation Integration and touchscreen front end

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Ipaq Rom 1.77 available for download

  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Ipaq Rom 1.77 available for download
  • From: "Keith Doxey" <ukha@xxxxxxx>
  • Date: Sat, 26 May 2001 13:12:07 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx
Hi Tim,
 
I know the Com Ports are OK because the project I am working on uses a device that attaches to a serial port. It works on both Com1 or Com2
 
If you are refering to Connection Settings in the Active Sync software this isnt visible until AFTER an iPaq has been partnered.
 
I hope to borrow a USB cable and try that, then I might be able to see the box to enable the Com ports.
 
Keith
-----Original Message-----
From: Timothy Morris [mailto:timothy.morris@xxxxxxx]
I know that this is really obvious Keith, but you have made sure that in connection settings you've enabled the serial port. I had dreadful problems with Win2k and serial ports, where they would show up in the device manager, but wouldn't talk to anything though. Seems to be OK now.
 
USB is reasonable now, but it still doesn't like to be connected via a hub.  

Yahoo! Groups Sponsor
Yahoo! Domains Yahoo! Domains

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home | Main Index | Thread Index
Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.