[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Clearing out Homebase.... (Split Aircon) (installing)
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Clearing out Homebase.... (Split Aircon)
(installing)
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Sat, 23 Jun 2001 10:23:17 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I was assuming I'd use expanding foam filler...
Phil
> -----Original Message-----
> From: John McManus [mailto:john.mcmanus@xxxxxxx]
> Sent: 23 June 2001 09:57
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Re: Clearing out Homebase.... (Split Aircon)
> (installing)
>
>
> One of the questions I also have concerns the permanent fitting of the
> aircon...
>
> When I make a hole in the wall to push the 'cable/connector'
> through, can I
> cement right up to the cable, or should I leave a gap around it &
> use mastic
> to 'seal' the join to the connector itself?
>
> I guess the mastic option is probably better, since I could more
easily
> remove the cable if necessary.
>
> Any thoughts?
>
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|