[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Splitting S-Video feed...
- To: <ukha_d@xxxxxxx>
- Subject: RE: Splitting S-Video feed...
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Tue, 24 Jul 2001 20:37:45 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I hope t work on the IR return later this week.
Just had a load more parts delivered so I can now build some more KAT5's
including a set t experiment on.
You will probably still need the termination removed when you get a
switcher
if your DVD is going t remain with the AV stack that way the DVD can feed
both KAT5 switcher and your AV amp.
Same goes for ITV Digital if you dont mount it at node Zero.
Keith
> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 24 July 2001 16:00
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Splitting S-Video feed...
>
>
> Cheers Keith ...
>
> I had wondered about this and whether it would be possible to remove
the
> termination on a KAT5 but had decided t try t keep them
> "standard" so that
> at a later date I didn't have t remember which units had been
> butchered^H^H^H^H^H^H^H^H^H^Hmodified.
>
> Obviously if I'm now looking t pipe OnDodgy as well as DVD then the
need
> for a switcher is far more pressing ;->
>
> Any more progress on the IR return dude?
>
> Phil
>
> > -----Original Message-----
> > From: Keith Doxey [mailto:ukha@xxxxxxx]
> > Sent: 24 July 2001 13:23
> > To: ukha_d
> > Subject: RE: [ukha_d] Splitting S-Video feed...
> >
> >
> > How about ZERO COST!
> >
> > Make up a lead by cutting an S-Video lead in half.
> >
> > One plug goes into your DVD player, the other into your AV amp.
> > Terminate BOTH the cut ends on the SCART Plug.
> >
> > After you have done this the units will still be double
> terminated but if
> > you remove the lid off the KAT5 and remove the tw 75 ohm
> resistors marked
> > R307 & R 407 you will remove the KAT5 termiantion and it will
be looped
> > through and terminated by your amp.
> >
> > Keith
> >
> > -----Original Message-----
> > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > Sent: 24 July 2001 12:16
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Splitting S-Video feed...
> >
> >
> > Anyone know where I can find an S-Video splitter at a reasonable
> > price that
> > won't double terminate the line? (£200 is not a reasonable price
by the
> > way!)
> >
> > I need t split a single S-Video output t go t my AV amp
> *AND* t a KAT5
> > feeding the TV upstairs.
> >
> > Cheers
> >
> > Phil
> >
> >
> >
> >
> > ____________________________________
> > Automated Home UK
> > http://www.automatedhome.co.uk
> > ____________________________________
> >
> > Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
> > ____________________________________
> > Automated Home UK
> > http://www.automatedhome.co.uk
> > ____________________________________
> >
> > Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t http://docs.yahoo.com/info/terms/
>
>
>
Home |
Main Index |
Thread Index
|