RE: Jingle bells

["Ian B" <Ian@xxxxxxx>]

It's about this point I should say we were trying to disable current
sensing
not local control. There was some leakage through the module which was
causing an LED to glow.

As far as I remember we did not try to disable local control as this was
not
the problem at the time. We did find the link though.

Ian

> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> Sent: 15 December 2001 13:42
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Jingle bells
>
>
> Good theory Phil, I have a totally duff AP doing just the same!
>
> The diagram to do this is for some other AP not the one's I bought
from
> Laser.
>
> I spent quite some time on the phone talking to Ian B. about this but
it
> never did work.
>
> Be warned, unless you can find out how to do it then let Ian B.
> and me know
> please.
>
> B.
>
>
> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 15 December 2001 13:36
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Jingle bells
>
>
> Yup ... You need to cut the link which will disable the local control
> feature of the appliance module...
>
> If you open up the module it is the only link that I have found on the
> board - just above the microcontroller and may be buried underneath a
> ceramic capacitor.
>
> Phil
>
> > -----Original Message-----
> > From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
> > Sent: 15 December 2001 12:50
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Jingle bells
> >
> >
> > I've plugged my tree lights into a appliance unit, and when I
> > send it the off
> > command, it comes back on again a few seconds later.
> >
> > I think someone has described similar behaviour with their
> > digibox in the
> > past, has anyone else seen it?
> >
> > --
> >
> >  Stuart Grimshaw <stuart@xxxxxxx>
> >  Chief Operations Officer
> >  Football Networks Ltd
> > -
> >  t:07976 625221
> >  f:0870 7060260
> >
> > ------------------------ Yahoo! Groups Sponsor
> > ---------------------~--> Unlimited PC-PC calling at Crystal
> > Voice! - Only $1/Mo. Download your free 30 day trial. Click
> > here. http://us.click.yahoo.com/Gb1xVB/GxbDAA/ySSFAA/IBOolB/TM
> > --------------------------------------------------------------
> > -------~->
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/