The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: T568A and T568B - WAS KAT5, CAT5 + Clipsal


  • To: "Phil Johnson" <whiskybob@xxxxxxx>, <ukha_d@xxxxxxx>
  • Subject: Re: T568A and T568B - WAS KAT5, CAT5 + Clipsal
  • From: "Phil Johnson" <whiskybob@xxxxxxx>
  • Date: Mon, 13 Aug 2001 12:48:55 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi,
 
So I've had time to look at the .NET this lunchtime and find that I've been following the T568B pionouts my wiring, I'm thinking that maybe the Clipsal is marked for T568A, therefore it never would have worked.  Well its somewhere to start anyway :-)  Here's a link to the site I used  http://stresscow.org/~jfuller/rj45/rj45.htm
 
You really miss having access to the internet when your connection is down, I'll let you know tomorrow if it worked!
 
- Phil
----- Original Message -----
Sent: Monday, August 13, 2001 11:05 AM
Subject: Re: [ukha_d] Re: KAT5, CAT5 + Clipsal

I see, this is great news for me, Darren says he had hassle and Mark says he has no colour coding on his sockets.  I deduce that I'm not mad, there is a light at the end of the tunnel and need to look at this problem in more depth.
 
Thanks all!
- Phil
 
----- Original Message -----
Sent: Monday, August 13, 2001 9:59 AM
Subject: Re: [ukha_d] Re: KAT5, CAT5 + Clipsal

My Clipsal sockets don't have ANY colour codes on them?  I had to work it out too.  Numbers/colours at home as well.
 
M.
 
----- Original Message -----
Sent: Monday, August 13, 2001 9:35 AM
Subject: [ukha_d] Re: KAT5, CAT5 + Clipsal

Phil,

I wired up my first Clipsal CAT5e connector last week and had the
same problem. Whilst your RJ45 connector is wired correctly the
colour codings on the back of the Clipsal seem to be either wrong or
for a totally different standard. I worked it out eventually and
wrote the right configuration down but I don't have it with me at the
moment. When I get home I'll post what I found unless someone else
here beats me to it.

Regards,
Darren

--- In ukha_d@y..., "Phil Johnson" <whiskybob@h...> wrote:
> Hi all,
>
> A request for help :-)
>
> Yesterday I decided that I'd finally get started on putting CAT5 in
walls, started off fine, ended with frustration.  My problem seems to
stem from my inability to wire a Clipsal CAT5e connector, I wired up
a length of CAT5 with an RJ45 connector at one end and the clipsal
jobbie at the other, plugged my KAT 5 units in either end, managed to
get sound, buzz and wobbly "picture".  OK, lets attempt to fix this
step by step I thought...
>
> KAT5's are working fine, connected them with a network cable;
perfect picture and sound.  So I decided to chop one end of
the "known good" network cable off and wire it to the clipsal, again
I get the same symptons buzz, sound and a wobbly picture.  After some
number of attempts to fix it and lacking a working internet
connection, I gave up. 
>
> Can anyone offer words of advice?  I realise there are 8 strands of
cable, so there is the likelyhood that I've got something wired
incorrectly.  The RJ45 connector is wired, from Pin 1:

> White/Orange, Orange, White/Green, Blue, White/Blue, Green,
White/Brown, Brown
>
> The Clipsal outlet is wired as per their colour coding on the back.
>
> I'm a wee bit stumped, so any hints or tips would be greatly
appreciated.
>
> Thanks,
> - Phil



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.