[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Best way to feed TV and audio
- Subject: Re: Best way to feed TV and audio
- From: andrew_richards_2000
- Date: Sat, 08 Dec 2001 22:24:00 +0000
Hi Keith
--- In kat5-users@y..., "Keith Doxey" <kat5users@d...>
wrote:
> You can run two or more receivers from one transmitter but they
MUST be
> daisy chained and all except The last receiver must have the
termination
> resistors removed (or not fitted in the first place!).
So is there a passthru RJ45 port or something similar?
>
> If the amp is located a long way from the TV, there is no way you
will get
> TV Tuner sound to the amp as the KAT would only be carrying its own
audio
> unless you had a second set of KAT5's.
Not sure what you mean by the "KAT would only be carrying its own
audio". Can't I have the 1st KAT5 receiver feeding video to the TV,
daisy-chain to the 2nd KAT5 receiver (over CAT5!) and feed audio to
the amp?
>
> Whatever you want to send can be done using KAT5 either with
standard units
> or custom built ones. The important thing is that you MUST put in
enough
> CAT5 cable to cope with everything.
>
> If you have planned "x" cables to a point and you know you
will be
having
> "x" devices there then you should be running at least
"x+2" cables.
>
Currently at 26 outlets and counting, with around 6 devices spoken
for so far!
Andrew
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|