[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Resetting MV1000's
- Subject: RE: Re: Resetting MV1000's
- From: "Malcolm Surgenor" <malcolm@xxxxxxxxxxxx>
- Date: Thu, 4 Nov 2004 18:12:33 -0000
can't see any such reset switch on my MV1000 I'm afraid. Even if I could
reset it I foresee some further problems.
1. I'd have to hook it back up to a PC initially with a serial cable to
configure it.
2. There's no cameras attached to mine now so browser access won't work
either. Sorry, not much help I know...
Malcolm
-----Original Message-----
From: pjqx [mailto:timfletcher@xxxxxxx]
Sent: 04 November 2004 09:52
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Resetting MV1000's
From memory there is a small reset switch recessed below by the
power fuse
and LEDs. If you keep it pushed for a few seconds you should see
the LED
flash green and then go off for 40 seconds and then relight. The
passwords
should then be set to nw-admin.
Tim.
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|