[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: (OT) Ceiling joist spacing
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: (OT) Ceiling joist spacing
- From: "Des Gibbons" <des@xxxxxxx>
- Date: Wed, 23 Jan 2002 22:41:27 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Can I just add to make sure the bit you hold is insulated if you have no
idea what is in there ;)
Des
> -----Original Message-----
> From: Steve Cooper [mailto:steve.cooper@xxxxxxx]
> Sent: Tuesday, January 22, 2002 16:57
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Re: (OT) Ceiling joist spacing
>
>
>
> If you are going to drill a small hole you can could use another
method.
>
> - Get a piece of fairly stiff piece of wire and bend it at right
angles.
> - Stick a pencil eraser on one end so that it point the same way as
the
> bend.
> - Slide the wire up into the cavity at a slight angle until the whole
of
> the bent bit is in the roof.
> - Then twist it round like you would with a TV aerial trying to get
the
> reception right.
>
>
Home |
Main Index |
Thread Index
|