[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Comfort UCM
- To: ukha_d@xxxxxxx
- Subject: Re: Comfort UCM
- From: "psghome2002" <psghome@xxxxxxx>
- Date: Sat, 23 Feb 2002 19:17:23 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I've got the same config as well - would have been nice to have the
connectors :(
--- In ukha_d@y..., Mike Griffiths <mike@a...> wrote:
> Think that is right Alan
> Comfort expect you to use the Naff white connector for KB/KA and
volts and
> Earth
> I found this connector not at all satisfactory and soldered the
connections
> on :(
> As I failed to find a supplier of the smart blue connectors and
pins
>
> Mike
> At Home
>
>
> -----Original Message-----
> From: Alan Shields [mailto:alan@xxxxxxx...]
> Sent: Sat 23 Feb 2002 12:45
> To: ukha_d@y...
> Subject: Re: [ukha_d] Comfort UCM
>
> Just got my comfort UCM01/A this morning. On inspection the
firmware
> copy IC is missing and there are no KA/KB screw terminals, yet
there are
> two sets of MIC/VOICE terminals.
>
> Anybody know whether this is normal or have they sent me a duff
unit?
>
> Thanks
> Alan Shields
> alan@t...
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@y...
> Subscribe: ukha_d-subscribe@y...
> Unsubscribe: ukha_d-unsubscribe@y...
> List owner: ukha_d-owner@y...
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|