The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IR Tx/Rx


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: IR Tx/Rx
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Sat, 23 Feb 2002 09:13:56 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Some people seem to think I have the answer to everything!
 
....so here goes :-)
 
They stock two ranges on Page 249...here is the cheaper of the two
 
BOURNS Multifuse
 
I hold    I trip           Stock Code
 
0.1A    [0.15A]        26-4600        50p
0.2A    [0.3A]          26-4602        55p
0.25A  [0.35A]        26-4604        55p 
0.3A    [0.45A]        26-4606        55p
0.4A    [0.6A]         26-4608        60p
0.5A    [0.75A]       26-4610        60p
1.1A    [2.2A]         26-4616         65p
 
01206 751166
 
There are others in the range upto 5A (or 8A in the Raychem range) but that should cover what you need.
 
As always, Rapid have sustantial discounts for quantity, for example the 0.1A drops to 40p for 25+, 34p for 100+
 
Hope that helps
 
Keith
 
 
-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 22 February 2002 23:49
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] IR Tx/Rx

Thanks for that Keith. Do you have a page or part number?
 

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

  • Follow-Ups:
Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.