[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
LD11 preset question (with Homeseer)
- To: ukha_d@xxxxxxx
- Subject: LD11 preset question (with Homeseer)
- From: "Paul Gordon" <paul_gordon@xxxxxxx>
- Date: Wed, 20 Feb 2002 10:11:42 +0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi chaps, hope someone can help me, cos try as I might, I cannot seem to
get
this to work how I want it....
I want to set a preset dim level in an LD11 *without* turning it on, so
that
the next time it is manually operated from the momentary switch, it will
come on at that level. I need to do this from Homeseer. (no problem doing
it
via script)
I've got the LD11 device set as "Leviton dim" in Homeseer - If I
set it to
"Preset dim", then dim & bright commands sent from the
Homeseer GUI are not
actioned.
If I send it a hs.exec10 script command with the "preset dim"
parameter, it
does precisely nothing, same goes for using the "extended"
parameter. Using
the "dim" or "bright" paramters turns the unit on at
the specified level...
Any thoughts?...
TIA
Paul G.
_________________________________________________________________
Home |
Main Index |
Thread Index
|