The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Help with X10 signal strength - Leviton Meter


  • To: ukha_d@xxxxxxx
  • Subject: Re: Help with X10 signal strength - Leviton Meter
  • From: "psghome2002" <psghome@xxxxxxx>
  • Date: Sun, 24 Feb 2002 17:22:50 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I thought you might have :)

--- In ukha_d@y..., "Phil Harris" <phillip.harris1@v...>
wrote:
>
> > > I will try unplugging everything (when guests leave
tomorrow!)
and
> > > testing this way which, I guess, is the first thing I should
try.
> > > However, I wondered if anyone had experience with this
Leviton
> > > tester and how much emphasis should be placed on the two
range
> > > readings. Should I ideally get -200mV and 2V readings or are
these
> > > going to naturally vary around the house?
> >
> > We're close enough to each other to have that get together we
> > keep promising and try to work it all out...
>
> Sorry ... Got you confused with someone else.
>
> Phil



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.