RE: Telephone Over Cat5

["James, Daniel" <daniel.james@xxxxxxx>]

opps, this should read:

The rear of THE patch panel is where you connect your CAT5 to, each RJ45
socket on the front of the panel has a corresponding IDC punchdown strip on
the rear of the panel.

I'll take the example of Pin1 (as its the same for all)

Connect all 6 Pin1s together by punching down a cable into Pin1 Socket1,
then punching this cable into Pin1 Socket 2 etc., now repeat this process
for the other 5 cables and then all the sockets will be wired together.

Then take a feed from your BT socket, and connect this to one of the
punchdown areas for one of above sockets(1-6), and hey presto, you now have
6 live
extensions on your patch panel.

HTH

Daniel


***********************************************************
This message is confidential and intended for the exclusive
use of the addressee(s) only and remains the property of
Exchange FS Group plc. You should not disclose its contents
to any other person. If you are not the intended recipient
please notify the sender named above immediately.

Registered Office: Munro House, Portsmouth Road, Cobham,
Surrey, KT11 1TE. Registered in England No. 2596452
***********************************************************