Brian
tell me to shut up if you have heard all this before but I have
just done this hack so my experiences might help.
I downloaded the 7mb arf file remaned etc and
tried rebooting the PC and the DDAR in every combination I could think
of none of them worked
at all I could get the Manager SSOftware to see the DDAR but the
DDAR just hung there initialising.
Eventually I went back to a known working copy
of receiver.arf (4mb so it must have had the old display
server patch on it) I got that working with the DDARs and then
patched it with the merge thingy. This gave me a file which looks
identical in size to the one I downloaded but it
works!
When you have fully powered off the DDAR for a
good few minutes switch it back on and when it says initialising take
the meerkats for a walk or something...the load seemed to take a long
time.
Also reboot the PC after you have done the
patch...you shouldnt need to but it may be that that was what
solved my problems.
I think you will get the grey box with the old
display servber patch as well so seeing that may not mean you have the
new patch working.
Couple of questions you may have answered
earlier but which might clear things
up.........
1. Does your DDAR initialise properly or does
it jsut sit there like a lemon?
2. Does the Audio software on your PC see the
ddar as a Unit?
3. Can you ping the DDAR from your PC..
probably teaching my maters mater to suck avian unborn
embryos but to ping it you can type ping NNN.NNN.NNN.NNN in the run
box on win 98 ME etc
Hope this helps some but it probably
wont!
Cheers
Mick
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups
is subject to the Yahoo!
Terms of Service.