The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Enron Auction


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Power triggering



Thanks Andy, I'll look at the channel # & power solution.
I posted before on remotecentral with no joy - mainly I think because it's
largely a US board with US AV gear being discussed!

Tony

> -----Original Message-----
> From: Andy Bovingdon [mailto:bov@xxxxxxx]
> Sent: 13 February 2002 15:51
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Power triggering
>
>
>
> It's sometimes worth posting a question also - I got the Sony
> TV codes that way. Also, with some TV's etc you can send a
> channel code that turns on, but re-sending does nothing
> or at worse re-sets the channel. Then only use the power
> button for off (or do channel # followed by power to make
> sure it's off) - still not ideal, but it can help.


********************************************************************
Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.