The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: s-video drilling


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: s-video drilling
  • From: "John Risby" <john@xxxxxxx>
  • Date: Sat, 9 Feb 2002 22:55:42 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

thanks again steve, i'll look into that.

> -----Original Message-----
> From: Steve Morgan [mailto:wormpurple@xxxxxxx]
> Sent: 09 February 2002 22:33
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] s-video drilling
>
>
> Indeed. The two part numbers I listed cover 3-12mm and
> 10-25mm respectively. So, you drill a small pilot hole and
> use the small one, changing to the large one if you need to
> go over 12mm.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.