Re: LEd Lights

["Matthew Norman" <mafiu@xxxxxxx>]

How do you do the resistors?  On each led or just one for the whole lot?

Maf

----- Original Message -----
From: "Ian B" <Ian@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Saturday, February 09, 2002 11:30 AM
Subject: RE: [ukha_d] LEd Lights


> They are all single LED's. There are 8 blues and 8 greens in total
with a
> current draw of about 300ma. Each LED is soldered to the bell wire and
has
> two layers of heat shrink over it for weather protection. So far so
good.
>
> >Looks very good by the way
> Thanks. Functional as well. We don't have street lights so are that
much
> more effective.
> Ian
>
> -----Original Message-----
> From: Mike Griffiths [mailto:mike@xxxxxxx]
> Sent: 09 February 2002 11:01
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] LEd Lights
>
>
> Ian
> Looking on your site at the LED lights you have fitted outside
> How many Led's in each cluster?
> Looks very good by the way
> Thanks
> Mike
> At Home
>
>
> -----Original Message-----
> From: Ian B [mailto:Ian@xxxxxxx]
> Sent: 09 February 2002 10:47
> To: Ukha_d
> Subject: [ukha_d] For those into PIC programming
>
> Hi everyone
>
> A quick note to tell you about the little PIC development board I have
> built. The first one is in action and being used to develop my IR
stuff
now.
> Essentially it is all the bits needed to run a PIC + an LCD and serial
> comms. All this using only 4 I/O ports.
>
> More details and a piccy at:
> http://www.mollyology.com/WebPages/Home/Index.htm
then projects - PIC LCD
> board. This is aimed at the PIC 16F84, 16F628 and other pin compatible
> units. I have the LCD driver program for both the 16F84 and 16F628.
>
> Ian
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>