The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Cat 5 Pinouts


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Cat 5 Pinouts
  • From: "Aidan Williamson" <fluff@xxxxxxx>
  • Date: Thu, 14 Feb 2002 22:38:19 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

You might want to look at

http://www.nycwireless.net/poe/index.html

Is a system for powering Wireless APs but is designed for low voltage DC
distribution.

A.

> -----Original Message-----
> From: Robert Chasmer [mailto:robert.chasmer@xxxxxxx]
> Sent: 14 February 2002 16:17
> To: 'ukha_d@xxxxxxx'
> Subject: [ukha_d] Cat 5 Pinouts
>
>
> Could anyone recommend a safe RJ45 pinout to use for distributing 12v.
> Basically I want to connect Nigel's IR circuit up via my patch
> pannel, which
> means I need 3 wires:-
> 1) +12v
> 2) 0v
> 3) Signal
>
> I want to avoid any problems if I accidently patched the IR box
> to either my
> Hub or Telephone points.
>
> I've found a number of guides describing what is used for a
> network and even
> a BT patch:-
> * http://www.cpe.surrey.ac.uk/support/utp.htm
>
> * http://www.rogerssystems.com/store/tech/how-to-cat5.cfm
>
> *
> http://www.bluemax.net/techtips/networking/Wiring_Tips/Wiring100TX
> /colorcode
> standards.htm
>
> Based on these I think the following pins are used (please correct me)
> (1) Network(Tx+)
> (2) Network(Tx-)
> (3) Network(Rx+)
> (4) BT(Line-A)
> (5) BT(Line-B)
> (6) Network(Rx-), BT(Bell)
> (7)
> (8)
>
> This leaves me to believe I could use pins 7 & 8 safely, but I
need one
> more.  I wired up my patch pannel for the phone about a year ago,
> so I can't
> remember what pins I used but I'll check when I get home.
>
> Any ideas?
>
> Also I want to buy some RJ45 / Cat 5 sockets to fit neatly in some
small
> boxes I'm put the IR boards in.   Anyone know if maplins sell small
Cat 5
> sockets that I could mount in a small box.
>
>
> Rob
> --
>      ______   __   _   ______   ______
>     / ___   / /  /  / __    / _____ HOME: chas@xxxxxxx
>    / /  /_/ / /__/ / / /__/ / / /__    http://www.kaosuk.co.uk/
>   / /  __  / ___  / / ___  /  \__  \            ----
>  / /__/ / / /  / / / /  / / _____/ / Rob Chasmer, MMT Computing
> ______/ _/  /_/ _/  /_/ ______/ robert.chasmer@xxxxxxx
>
> This email and any files transmitted with it are confidential and
intended
> solely for the use of the individual or entity to whom they are
addressed.
> If you have received this email in error please let us know by
> e-mail reply
> and delete it from your system; you may not copy this message or
disclose
> its contents to anyone.  Please note that any views or opinions
> presented in
> this email are solely those of the author and do not necessarily
represent
> those of MMT Computing plc.  Finally, the recipient should check
> this email
> and any attachments for the presence of viruses.  MMT Computing
> plc accepts
> no liability for any damage caused by any virus transmitted by
> this email.
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.