[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Swish IR Stuff
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Swish IR Stuff
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Thu, 14 Feb 2002 16:09:53 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
OK ... Here's a "watch this space".
John Hill has just finished designing and making a prototype X10 curtain
controller that will give discrete open and close commands to a K400
motor (and the new Silent Gliss version).
I'll be picking it up on Saturday to test and there are a couple of
"bugs" in the PIC programming to be sorted but it seems to work
OK at
the moment.
Neither John nor I want to be building circuits for this unit so we are
trying to get it taken on by another company however there are a few
things that need to be ironed out such as casing the thing (it obviously
has mains voltages flying about inside as it responds to X10), ensuring
it is safe and also ensuring that the original designer of the X10
receive circuit doesn't mind us using his subsystem in our design.
The circuit isn't cheap to build and the boards won't be cheap to have
made in limited quantities so the board will not be cheap either but it
will give you X10 control of your curtains! (I needed six of 'em.)
Phil
> -----Original Message-----
> From: paulgwa [mailto:paulgwa@xxxxxxx]=20
> Sent: 14 February 2002 14:10
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Swish IR Stuff
>=20
>=20
> Somebody posted recently about getting the K400 motor to do
discrete=20
> open and close movements rather than just operation via toggle switch.
>=20
> Sorry to be a pain but can't find the thread on yahoo, can someone=20
> let me know how this is achieved
>=20
> Regards
>=20
> Paul
>=20
> --- In ukha_d@y..., "Stuart Whyte" <lists@f...> wrote:
> > Gents,
> >=20
> > Just been down to my local B&Q and they have a number of
Swish IR
> remote
> > control modules (=A325), and some extra IR receivers (=A35) in
their
> clearanc
> > range. Do these work with the K400 motors??
> >=20
> > If anyone would like me to pick up any, let me know.
> >=20
> > Stuart
>=20
>=20
> ------------------------ Yahoo! Groups Sponsor=20
> ---------------------~--> Get your FREE credit report with a=20
> FREE CreditCheck Monitoring Service trial=20
> http://us.click.yahoo.com/ACHqaB/bQ8CAA/ySSFAA>
/IBOolB/TM
>=20
>=20
> --------------------------------------------------------------
> -------~->
>=20
> For more information: http://www.automatedhome.co.uk=20
> Post message: ukha_d@xxxxxxx=20
> Subscribe: ukha_d-subscribe@xxxxxxx=20
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx=20
> List owner: ukha_d-owner@xxxxxxx=20
>=20
> Your use of Yahoo! Groups is subject to=20
> http://docs.yahoo.com/info/terms/=20
>=20
>=20
>=20
For more information: http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe: ukha_d-subscribe@xxxxxxx=20
Unsubscribe: ukha_d-unsubscribe@xxxxxxx=20
List owner: ukha_d-owner@xxxxxxx=20
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/=20
Home |
Main Index |
Thread Index
|