The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: momentary push switches/LD11


  • To: ukha_d@xxxxxxx
  • Subject: Re: momentary push switches/LD11
  • From: "psghome2002" <psghome@xxxxxxx>
  • Date: Thu, 14 Feb 2002 15:29:56 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Well... OK... a large 5 bed house but not quite a mansion :)

I went for approx 3 circuits per room in most of the downstairs
rooms and 3 in the two master bedrooms (bedside lights x 2 and
ceiling light). I must admit to being a bit of a lighting freak (it
makes so much of a difference) and a gadget junkie!

AD10's will switch a variety of other non-dimmable lights and other
units. I need to confirm they will work OK with flourescent though?

Paul.

--- In ukha_d@y..., "graham_howe" <graham@s...> wrote:
> --- In ukha_d@y..., "psghome2002" <psghome@h...>
wrote:
> > I'd be interested to look at this as well - I've just picked up
38
> > LD11's and 7 AD10's to cover the whole house! Any chance of a
copy
> > too?
> >
> > Thanks,
> >
> > Paul.
> >
> 38 LD11's ! Do you mean house or mansion? Are you controlling
every
> light bulb individually? I settled on one LD11 per room with a
couple
> in some rooms (for main and effect lighting). Also, what are you
> using the 7 AD10's for?
>
> Graham


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.