[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: RS232 or RF X10?
- To: ukha_d@xxxxxxx
- Subject: Re: Re: RS232 or RF X10?
- From: steve.cooper@xxxxxxx
- Date: Thu, 14 Feb 2002 11:28:53 +0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>>In the scene setting situation, the thing which is most un-natural
is
>>that each event happens in strict sequence - it's hard to get the
>>appearance of interleaved, co-ordinated action across multiple
>>devices which would make the transition "smooth".
If you have all the lights on the same house code you can select the smart
group checkbox on the device action page.
"SmartGroup is used when the event triggers and the X10 commands are
sent
to your devices. If this option is enabled, HomeSeer will group together
all devices with similar actions and located on the same housecode. The end
result is that all these devices will react at the same time. "
S
___________________________________________________________________________
The information contained in this message is confidential and may be
legally privileged. If you are not the intended recipient, please do not
read, copy or otherwise use it and do not disclose it to anyone else.
Please notify the sender of the delivery error and then delete the
message from your system.
Any views or opinions expressed in this email are those of the author only.
Thank you for your assistance.
___________________________________________________________________________
Home |
Main Index |
Thread Index
|