The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: Fujitsu Memory Configurations


  • To: ukha_d@xxxxxxx
  • Subject: Fw: Fujitsu Memory Configurations
  • From: "Gareth Cook" <gcook@xxxxxxx>
  • Date: Mon, 4 Feb 2002 11:19:13 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


I suppose that WOULD be the smart thing to do :-) - I'll try it tonight.

G.
Gareth Cook
Senior Engineering Specialist

EMEA ED, IBM SWG
Lotus Park, Staines, TW18 3AG
Office:  +44 (0) 1784 445 166
Mobile:  +44 (0) 7980 445 166
Fax:      +44 (0) 1784 499 166
Work: g@xxxxxxx
Personal:
g@xxxxxxx
AIM Chat : TheBoyG
MSN Chat : chat@xxxxxxx


----- Forwarded by Gareth Cook/UK/IBM on 04/02/2002 11:19 -----
Discussion
Main Topic

"Phil Harris" <phillip.harris1@xxxxxxx>
Today 11:12

.
Subject:
.
RE: [ukha_d] Fujitsu Memory Configurations
.
Category:




> DIMMS in general normally do NOT have to be installed in Pairs...

True when you're talking 144/168 pin DIMMs but these are 72 pin ones
which in the old Pentium Mobo's using 72pin SIMMs had to be installed in
pairs.

> I have 3 laptops which all take SODIMMS, and NONE of those
> machines require
> them to be fitted in pairs. (in fact at least one of them
> only has a single
> slot!)

Are these using 72pin DIMMs though?

> So until it has been proven by Gareth, I'd take it with a
> large pinch of
> salt...

Agreed but I do expect it to be pairs needed...

....perhaps Gareth could just pull one DIMM out of a penpad that he has
now and see whether it recognises just the memory in the one remaining
slot?

Phil



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.