The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Pronto batery life



I usually find dropping it causes either a reset or the contrast gets completely buggered.
They are reasonably resilient buggers though - must have droped mine 100's of times onto wooden floor with no damage done.....until about 3 months ago when the screen cracked :(  Had to replace my original US pronto with a UK one from Richer Sounds.  It seemed a better bet paying 150 quid there than about 70 quid to import a replacement screen which may/may not have worked.....
Don't think the UK ones are as sensitive as the US ones either :(
 
Tony
-----Original Message-----
From: Nick Broughton [mailto:mail@xxxxxxx]
Sent: 01 February 2002 22:47
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Pronto batery life

I had/have similar problem with mine.  Adjusting battery contacts helped,
but batt life indicator is useless due to software problem.  As I
understand it, this is a known problem.  I put mine on the base to charge
overnight about once a month and it seems to be fine unless I forget.

It also seems to suffer very badly if it gets dropped to the floor from the
arm of the sofa.  It's only about 20 inches and carpeted, so no permanent
damage is done, but, particularly if the battery is low, will give up
working for about half an hour...

Nick

-----Original Message-----
From:      Simon Coates [SMTP:ecolume@xxxxxxx]
Sent:      01 February 2002 19:51
To:      ukha_d@xxxxxxxSubject:      Re: [ukha_d] Pronto batery life

Remove your rechargeable battery and adjust the contact pins to make a
better contact with the battery.  Replace the rechargeable battery ensure
the pins are in good contact with the battery.
Common fault with the Pronto.

Simon
  ----- Original Message -----
  From: Steve Bradley
  To: ukha_d@xxxxxxx  Sent: 01 February 2002 19:37
  Subject: Re: [ukha_d] Pronto batery life


  I've got a Prnoto with the docking station & rechargeable battery. It
doesn't seem to charge properly & will only charge for a couple of minutes
before deciding it's fully charged. Then after a couple of hours of using
it it tells me it's dead and needs charging again. Any ideas?

  Steve
    ----- Original Message -----
    From: Jeff
    To: ukha_d@xxxxxxx    Sent: Friday, February 01, 2002 7:28 PM
    Subject: Re: [ukha_d] Pronto batery life


    I one of the earlier pronto's and the batteries last about 6 months so
two weeks does seem a bit short. And I have the backlight set to always on.

    Jeff.
      ----- Original Message -----
      From: BUTLER, Tony, FM
      To: 'ukha_d@xxxxxxx'
      Sent: Friday, February 01, 2002 11:52 AM
      Subject: RE: [ukha_d] Pronto batery life


      They do drain normal batteries quite quickly.
      I have the recharging unit but to be honest, probably better of with
decent rechargables - cheaper than the docking cradle if nothing else....

      Contrast wise, you sure you''re not just accidentally moving the
contrast wheel (happens to me all the time) ???

      Wouldn't worry about rubbish (apart from it looking kack!) as the
screens don't seem that sensitive a the edges...

      Tony
        -----Original Message-----
        From: Robert Chasmer [mailto:robert.chasmer@xxxxxxx]
        Sent: 01 February 2002 11:41
        To: 'ukha_d@xxxxxxx'
        Subject: [ukha_d] Pronto batery life


        Hi guys.

        For Xmas, I got a 2MB Pronto, and have noticed one or two odd
things.
        * The AA's that came in the box only lasted about 2 weeks.  I did
do
        a lot of learning and screen programming so wasn't too worried.

        * I replaced the batteries with 4 Duracells 2 weeks ago and the
battery life
        graphic in the setup screen shows its lost 2 bars of power.  Is
this normal?

        * The contrast/brightness starts off very dim when I start using it
for the
        first time in the evening, but by the end of the night I find
myself having
        to reduce the brightness.  Is this normal?

        * Is it possible to get dust or rubbish stuck in the edges of the
screen
        which causes the screen to be continusly pressed?  Or don't
touchscreens
        work like that?

        Thanks (Should I be asking the peeps at remotecentral)


        Rob
        --
             ______   __   _   ______   ______
            / ___  / /  / / __   / _____ HOME: chas@xxxxxxx           / /  /_/ / /__/ / / /__/ / / /__    http://www.kaosuk.co.uk/
          / /  __  / ___  / / ___  /  \__  \            ----
        / /__/ / / /  / / / /  / / _____/ / Rob Chasmer, MMT Computing
        ______/ _/  /_/ _/  /_/ ______/ robert.chasmer@xxxxxxx
        This email and any files transmitted with it are confidential and
intended
        solely for the use of the individual or entity to whom they are
addressed.
        If you have received this email in error please let us know by
e-mail reply
        and delete it from your system; you may not copy this message or
disclose
        its contents to anyone.  Please note that any views or opinions
presented in
        this email are solely those of the author and do not necessarily
represent
        those of MMT Computing plc.  Finally, the recipient should check
this email
        and any attachments for the presence of viruses.  MMT Computing plc
accepts
        no liability for any damage caused by any virus transmitted by this
email.


        For more information: http://www.automatedhome.co.uk
        Post message: ukha_d@xxxxxxx        Subscribe:  ukha_d-subscribe@xxxxxxx        Unsubscribe:  ukha_d-unsubscribe@xxxxxxx        List owner:  ukha_d-owner@xxxxxxx
        Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service..



      For more information: http://www.automatedhome.co.uk
      Post message: ukha_d@xxxxxxx      Subscribe:  ukha_d-subscribe@xxxxxxx      Unsubscribe:  ukha_d-unsubscribe@xxxxxxx      List owner:  ukha_d-owner@xxxxxxx
      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



    For more information: http://www.automatedhome.co.uk
    Post message: ukha_d@xxxxxxx    Subscribe:  ukha_d-subscribe@xxxxxxx    Unsubscribe:  ukha_d-unsubscribe@xxxxxxx    List owner:  ukha_d-owner@xxxxxxx
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


        Yahoo! Groups Sponsor
              ADVERTISEMENT




  For more information: http://www.automatedhome.co.uk
  Post message: ukha_d@xxxxxxx  Subscribe:  ukha_d-subscribe@xxxxxxx  Unsubscribe:  ukha_d-unsubscribe@xxxxxxx  List owner:  ukha_d-owner@xxxxxxx
  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

<< File: ATT00076.html >>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.