[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Homeseer/Slink-E/Sky Digibox
- To: <ukha_d@xxxxxxx>
- Subject: RE: Homeseer/Slink-E/Sky Digibox
- From: "Ian Lowe" <ian@xxxxxxx>
- Date: Wed, 6 Feb 2002 10:39:56 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
okay, I had this with my UIRT, there are two things...
firstly, carrier of 38Khz works perfectly on my pace Sky digibox
Secondly, you need to make sure your emitter isn't too close to the digibox
(or if you do, make sure it's aligned *exactly*)
I found that it went from being a little ropey to working *flawlessly* when
I either lined up the transmitter exactly, or moved it a litle away (three
to four inches)
Ian.
-----Original Message-----
From: kinchyuk [mailto:kinchyuk@xxxxxxx]
Sent: 06 February 2002 10:10
To: ukha_d@xxxxxxx
Subject: [ukha_d] Homeseer/Slink-E/Sky Digibox
I've been trying to get the Homeseer software to control my Sky
digibox via the infrared ports on a Slink-E. So far I'm not having
much luck - even when I got it to learn every button it doesn't seem
to want to work properly.
Has anyone got a device file for the Digibox with the relevent codes
in it? Also, there seems to be a load of extra info I need - like
carrier frequency - which might be the problem.
Alex
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|