[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: NEW ukha project
- To: <ukha_d@xxxxxxx>
- Subject: RE: NEW ukha project
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Mon, 11 Feb 2002 22:58:26 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I rejoined the PICLIST the other day and there is discussion on there about
MP3 players.
Microchip also have a development kit for PicWeb using some software from
www.iosoft.co.uk called ChipWeb. There is an ethernet controller that is
connected to the PIC to interface it to the LAN.
Have to agree the Rabbit is a good product as well as being a nice small
integrated solution although I havent had time to play with it and am not a
C programmer.....yet :-)
Re: Displays.
Farnell stock VFD's that are LCD compatable so you can have the option of a
cheap LCD or a better looking but more expensive VFD. The VFD can be
filtered to quite a few different colours.
Keith
-----Original Message-----
From: Stuart Poulton [mailto:swp@xxxxxxx]
Sent: 11 February 2002 21:16
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] NEW ukha project
Ok,
My initial plan is as follows, use of the MAS3587F combinded MP3-Decoder
and DAC, and Rabbit Microcontroller.
My reasoning
the MAS Chips seem to be the most common in home-brew MP3 Player,
therefore I'm assuming they are widley available and easy to use.
Since Dallas Semi Can't supply TINI right now, Rabbit looks like a
reasonable way to get the TCPIP Stack required.
Comments ?
Cheers
Stuart
On Mon, 11 Feb 2002, K. C. Li wrote:
> On Mon, 11 Feb 2002, Ian Craig wrote:
>
> > I've thought about this as well. I have one of the Cirrus Logic
dev.
boards
> > here at work which I think uses the same processor as in the Rio
> > Receiver/DDAR(EP7212) and it would be straightforward to knock up
a
schematic
> > and layout but I don't have any Linux programming skills to get
the
thing
> > working.
>
> My nephew has successfully used a Xilinx development board with a few
> components to make a working ethernet MP3 player. With the FPGA chip,
you
> can do almost anything by programming it via JTAG. Using a FPGA for a
> straightforward ethernet MP3 player is rather an overkill though.
>
> Regards,
>
> Kwong Li
> li@xxxxxxx
> Laser Business Systems Ltd.
> http://www.laser.com
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|