The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Fwd: A10 X10 Receiver/Transceiver Module (AWM2/ ex RB224) due in Stock tomorrow!


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Fwd: A10 X10 Receiver/Transceiver Module (AWM2/ ex RB224) due in Stock tomorrow!
  • From: "Kenneth Watt" <kennwatt@xxxxxxx>
  • Date: Thu, 31 Jan 2002 14:22:55 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Good, better than nothing...but still no lamp controller which is the
one I certainly would have more interest in, especially with "status
response" in the firmware.

One thing though....the price!

K.

> -----Original Message-----
> From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
> Sent: 31 January 2002 11:27
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Fwd: A10 X10 Receiver/Transceiver Module (AWM2/ ex
> RB224) due in Stock tomorrow!
>
> OOH OOH OOH!!! I just got this from Andy @ Comfort, re the new A10
units
> ...
>
> ----------  Forwarded Message  ----------
>
> Subject: A10 X10 Receiver/Transceiver Module (AWM2/ ex RB224) due in
Stock
> tomorrow!
> Date: Thu, 31 Jan 2002 11:20:23 -0000
> From: "Andrew Roberts" <andrew@xxxxxxx>
> To: "Andrew Roberts" <andrew@xxxxxxx>
> Cc: <comfort-technical@xxxxxxx>, <comfort@xxxxxxx>
>
> You contacted us recently expressing an interest in the A10 modules
TB214
> and
>  RB224.
>
> Well, the good news is, we will have the RB224 in stock this Friday
1st
>  February 2002!.  It is now called the AWM2 and has had a firmware
update
> to
>  allow any X10 transmitter to program it such as the HR10, UR24(8 in 1
>  remote) or the PC Active Home software. The transmitter version
(TB214)
> is
>  expected in in March 2002.
>
> The module is rated 16 Amp at 230v and can be used to switch sockets
or
>  lights. The module is small enough to sit in an MK ceiling rose or
within
> a
>  socket backbox. There are low voltage switch wires which allow the
>  connection of tywo switches: 1. a local switch to control the module,
and
> 2.
>  a switch can connect to transmit another X10 signal - wow!. The
switches
> can
>  be momentary or toggle type.
>
> You can buy the modules on line here:
>  http://www.comfort.org.uk/products/index_a10.html
>
> We will also be stocking the clipsal range of switches very soon.
>
> Regards
>
> Andrew Roberts
> Comfort Home Controls - UK
> (Tel: 44(0)1244 680675)
> (Fax:44(0)1244 671455)
> WebSite: http://www.comfort.org.uk
>
> -------------------------------------------------------
>
>
>
> --
>
>  Stuart Grimshaw <stuart@xxxxxxx>
>  Chief Operations Officer
>  Football Networks Ltd
> -
>  t:07976 625221
>  f:0870 7060260
>
> ------------------------ Yahoo! Groups Sponsor
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.